Verktøy og Tilbehør

Release Button Cover

Release Button Cover

Legges til på utløserknappen for å gjøre det enklere for brukeren. Perfekt for geriatrikere eller an...
Exo Lamination Plug

Exo Lamination Plug

Brukes for å benytte Air-Lock i ”Exo” hylser.
Pin Cap

Pin Cap

Pin Cap brukes for å tette hylsen og holde den lufttett når man brukerlang ”Pin” med en standard lås...
One Shot Connector

One Shot Connector

Up to 0.6" offset. Connector with tie off ring for easier lay-ups. Lower profile than Alignable Conn...
Alignable Connector

Alignable Connector

Up to 0.6" of offset. Ideal for use with Air-Lock and Easy Off Locks. Can be glued to the lock in an...
Multi-direction insert

Multi-direction insert

Up to 0.33" offset in two directions. Installed into connector to allow connector to be keyed onto b...
Single direction insert

Single direction insert

Up to 0.33" of offset in one direction. Installed into connector to allow connector to be keyed onto...
Fabrication Dummy

Fabrication Dummy

Recommended for fabrication of flexible inner liners or for inner layer of PETG with Elevated Vacuum...
Lock Wrench

Lock Wrench

Brukes for å ta bort ventilhuset på Air-Lock for å komme til på innsiden. Tilsvarer dybde på 13 mm.
Pediatric Alignable Connector

Pediatric Alignable Connector

Kan brukes for å få ”offset” Connectoren med opp til 0,64mm. Kan benyttes av brukere opp til 45 kg.
Pediatric Fast Four Connector

Pediatric Fast Four Connector

Pediatric 4-hulls Connector som fester i midten av låsen. Kan benyttes av brukere opp til 45 kg.
APC Push Lock Laminating Former

APC Push Lock Laminating Former

APC Push Lock Stainless Steel Laminating Former Kit, inkludert 65mm diameter Inner Former, Outer For...
APC Push Lock Laminating Former Kit

APC Push Lock Laminating Former Kit

APC Push Lock Delrin Laminating Former Kit, inkludert 65mm diameter Inner Former, Outer Former, Comp...
ClickLock Thermoforming Ring

ClickLock Thermoforming Ring

Single groove thermoforming ring for use with modular Clutch Lock mechanism with ClickLock. Include...
ClickLock Laminating Ring

ClickLock Laminating Ring

Double groove laminating ring for use with modular Clutch Lock mechanism with ClickLock. Includes s...
Aluminium Spacer

Aluminium Spacer

For use with ClickLock Lamination Kit (871650116) and ClickLock Thermoform Kit (876501116)
APC Push Lock Tooling

APC Push Lock Tooling

Reusable Aluminum tooling creates a void in your thermoformed socket to accommodate the Push Lock. I...
Push Lock Former Body

Push Lock Former Body

Replacement Delrin® inner former body only, for use with lock tooling kit. Includes 4 pins.
Push Lock Former Parting Tool

Push Lock Former Parting Tool

Replacement Delrin® parting tool for use with Push Lock former kits.
Push Lock Former Replacement Stud

Push Lock Former Replacement Stud

Replacement Stainless Steel center stud for use with Push Lock tooling.
Push Lock Former Compression Nut

Push Lock Former Compression Nut
Push Lock Gummi O-Ring

Push Lock Gummi O-Ring

Used to reduce movement and eliminate noise.
Laminating Thread Tooling

Laminating Thread Tooling
Alps Lock tilbehør

Alps Lock tilbehør